When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
• Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave
• Special frequency weighting mode for measuring electric current from EMF in the human body
• AC Magnetic Mode covers 40 Hz - 100 kHz with range of 0.1 - 100.0 milligauss (mG)
• AC Electric Mode covers 40 Hz - 100 kHz with range of 1 - 1000 volts per meter (V/m)
• RF Mode covers 20 MHz - 6 GHz with range of 0.001 - 19.999 milliwatts per square meter (mW/m2)
• AC magnetic measurements are 3-axis, allowing for quick readings, regardless of meter orientation
• Large liquid-crystal display (LCD) for crystal clear, accurate readings
• Adjustable backlight for use in low-light environments
• Audio Indicator emits sound that helps to pinpoint EMF sources
• Peak Hold captures fast pulses, for measuring fast digital signals
• Operates for more than 20 hours on a 9V battery, with a low battery indicator
AC Magnetic 3-axis, true magnitude ; Frequency Range :40 Hz – 200 Hz ; Accuracy :±4% @ 50/60 Hz ; 100.0 milligauss ; Sensitivity:0.1 milligauss AC Electric 1-axis, true magnitude ; Frequency Range :40 Hz – 100 kHz ; Accuracy :±4% @ 50/60 Hz ; 100.0 milligauss ; Sensitivity:0.1 milligauss RF 1-axis ; Frequency Range 20 MHz – 6 GHz; Accuracy ±20% @ 1 GHz; 19.999 mW/m^2;Sensitivity :0.001 Rechargeable Battery 9V battery with indicator RF and Microwave Field DetectionTo measure an RF field, turn the knob to the RF setting and point the top of the meter at the
potential source, or simply hold the meter vertically.
The RF Mode uses the same plate sensor as the AC Electric Mode.
The Standard ModesStandard modes for AC magnetic fields (MAG) and AC electric fields (ELEC) will
measure fields using a flat frequency response. That is, all frequencies from 40 Hz to 100 kHz
(100,000 Hz) are measured with equal sensitivity
The Weighted ModesOn Weighted modes, the Field Measurement shows a number
proportional to the average electric current induced inside the human body from the fields,
and the number is equivalent to the amount of 60 Hz magnetic or electric field that would be required to induce that much current.
The Peak Measurementthe Peak Measurement ( (small numerals in the upper-left of the display) is of more interest than the
Field Measurement (large numerals at the bottom). The information from digital RF devices is
transmitted in brief packets that occur irregularly (perhaps once per minute with smart meters
and several times per second with Wi-Fi transmitters or mobile phones that are in use).
EMM02 -- 3 in 1 EMF Meter SpecificationsOlmlmo Emf Meter (Electromagnetic Field) tester is used to measure the radiation of an electromagnetic field. An Rechargeable Radiation Detector EMF is a combination of an electric field and a magnetic field combined with electric fields found on most electrical appliances when plugged into an outlet. A magnetic field is created when the appliance is switched on at the outlet. EMF testers are used to diagnose any problems with electrical wiring, power lines and electrical shielding effectiveness.
Specifications• Mobile phone and cell tower RF radiation
• Smart meter RF radiation
• Wi-Fi router and Bluetooth RF radiation
• Overhead AC power line and transformer EMF emissions
• Laptop, refrigerator, circuit breaker box, etc. appliance EMF emission
• EMF emission inside aircraft and motor vehicles
• Microwave oven leak
• Location and EMF of wiring in walls
• EMF from plumbing pipes used as grounding
Emf Meter,Electric Field, Radio Frequency (Rf) Field, Magnetic Field Strength Me
$98.89
Digital LCD EMF Meter Electric Field Electromagnetic Radiation Strength Meter
$37.10
Emf Meter, Electric Field, Radio Frequency Field, Magnetic Field Strength Meter,
$134.58
Popular Forums