The ProClip Auto Cradle for the 8900 arrived today. Below is a quick review.
Price - $34.99 for the model shown below (There are other options)
Construction Excellent
Design Simple. Also excellent
Installation Easy. You just need a mounting surface. I have a leather covered custom base for my 07 VW Touareg. (Made by KudaUSA.com) Since I had a cradle mount already installed on the base, fortunately, the hole pattern on the ProClip base was identical. Bonus! Otherwise, I would have had to drill small pilot holes and use the self-tapping screws that came with the ProClip cradle.
ProClip sells all sorts of bases. Check out their website for the solution that best suits your car.
Note: IMHO, vent mount systems dont make much sense to me. You both obscure the vent in question and also cause the phone to heat up. (During the winter of course) No electronic device Im aware of enjoys high heat. I cant imagine the 8900 being any different. So, I would suggest investigating the Kuda mounts as they are designed for your interior. Or take a look at the wide range of sheet metal solutions at ProClip. Some simply slip into gaps between in the instrument panel or console and the upholstered dash or console.
Issues If you have a skin installed, you will have to spread the cradle just a tiny bit to prevent damaging the skin. I have the Invisible Shield on my 8900 and the added thickness as well as the friction made it impossible to slide into the cradle. About 2 minutes with a heat gun, and I was able to spread the cradle just enough to get the phone in without damaging the skin. It fits nicely now. Due to the thick plastic. (ABS I believe) it will be very difficult to spread the cradle without using a heat gun. A hair dryer wont generate enough heat. Another option would be to remove the side sections of the skin. Youre call.
General thoughts I like this cradle a lot. Were it not for the Invisible Shield, the installation would have taken me less than 5 minutes. It may take you up to 20 minutes to install if you have to drill holes or install a base. But still, super easy.
There is a clearance hole in the side to plug in the charger. Nice. So many cradles exclude this simple feature.
The cradle angle has a generous range of adjust ability and the tension on the pivot can be adjusted via a screw in the center. I pretty much locked mine down as I cant envision ever needing to pivot the phone.
Excellent product. Highly recommended.
Images of my install. (The phone appears to be at an odd angle, but it is facing me perfectly.)